worst pcv reroute diy: by duramaxxx

[duramaxxx]

i did the worst pcv reroute diy in history so i thought i would share it. besides it was atwork and i had nothing better to do. first i made sure i had parts which is evident if you see slide 1. then removed the boost tube so i could reach the bolt. then unclamped the clamp around the intake. then i removed the intake to get to the other bolt.

[swatkins]

Did it work ? ):h

[duramaxxx]

after removing the bolt i took the whole system out. the next step was to replace the holes with the fittings i got. then to cut the 10ft heater hose in half slide the hose over the top and secure it. the next step was to put a cap over the intake tube which the picture shows. after that i routed the hose downwards. also i have a few pics of the oil from the pcv that i cleaned from the boost tubes, etc. i like to make sure people know why they are doing this. so anyway thats it. i know everyone has done it and everyone knows how to but there wasnt any diys on this here so im the first. haha.
stay tuned for the dpf delete and egr plate install in which i will show why we do that too. hahaha):h

[hondarider552]

:thumb:Pretty good Bret!