Got something on my glass today

[RickDLance]

Might be a little big? ):h

http://dmaxcentral.com/forum/attachment.php?attachmentid=50&stc=1&d=1211749404

http://dmaxcentral.com/forum/attachment.php?attachmentid=51&stc=1&d=1211749404

[Fingers]

Custom no doubt.
:)

[RickDLance]

Yes sir.:)

[neversatisfied]

Looks good:thumb:

[Josh2002cc]

Hey I got one kinda like that. I think Dave does too, well just not so big.

[BudTX]

Looking good!!

[James Hess]

how might i aquire one of these things that stick??????

[RickDLance]

We are working on getting some done. I am not a professional, but I'll make a few for donations if no one has any objections.;)

[James Hess]

no objections by me it aint free to get the materials. let me know how much and when and ill paypal you if you have a way of doing that. if not we can figure something out im sure.

[RickDLance]

What size? Also we've decided to use a different font and leave off the www. Any problems with that? I have a couple in this font made up all ready.;)

[James Hess]

id perfer without the www. and whatever font looks best that you decide. lets say half the width and height of yours would work

[blksmok]

Oh sure... now he gets picky. :lol:

[RickDLance]

PM me your address and what you just posted please.;)

[James Hess]

yes i like to sneak up with the details and slam the unspecting:evillol:
:lol:

[blksmok]

Thanks Rick! :thumb:

http://i124.photobucket.com/albums/p40/r3df3ath3r/V2/IMG_2609.jpg

[Josh2002cc]

WTH Dave...My decal not good enough?

[blksmok]

WTH Dave...My decal not good enough?

I displayed your decal proudly at the tracks... this one was a little bigger though and the white matches the truck. :D

[swatkins]

I am undecided as to where to place mine... . I was thinking that the view through the rear mirror would be obscured too much with it placed where you placed yours Dave.. I was thinking about placing in the center above the lower edge of the glass...

How's it working out for you Dave?

[RickDLance]

I can't see mine through the review under normal circumstances.

[blksmok]

It's not a problem at all. The letters aren't wide enough to really block any significant view. The top part of the glass on the back is about 2" higher than what you can see out the back window. I have the heater lines in my glass and the letters sit on the second heater line down looking out the back from the inside.

[swatkins]

I can't see mine through the review under normal circumstances.

Well,, under normal circumstances you can't see anyway! ):h

[James Hess]

i just wanted to throw a huge thankyou to Rick for gettin a decal to me for my truck it was looking so plane without it.

[blksmok]

:nopics:

[jc64]

Rick,
If it bothers ya, there is someone who can get that off with a razor blade and use lighter fluid to dispose of it for ya.








):h ):h ):h ):h ):h
Just joking ya.
jc

[minisub]

We are working on getting some done. I am not a professional, but I'll make a few for donations if no one has any objections.;)

I'll make a donation. Can you get one to me before we take off for Merchant's next Friday?

[RickDLance]

PM me the size you want. Also let me know which style. Mine at the beginning of the thread or the one Dave got.

[swatkins]

I am waiting on the decal guy to call me.. He is really tied up this week so it will be a week or two..

[James Hess]

ill post up a pick soon as i get one:thumb:

[swatkins]

Ok.. I am going to install the decals in the morning,, How is the best way? Standard clean and wet the window and then squeeg?

[RickDLance]

Two people. One on each end. Both need to be able to see.):h

[swatkins]

Before I always just wet the glass and that allowed you to move it around on the wet glass to position it Then squeeg it down...

[James Hess]

last time i put a decal on a window which was a while ago, i used rubbing alcohol to clean the surface and then i wetted the glass to be able to move it if i needed too. then i took a washcloth soaked in warm to hot water and rubbed it across the top of the backing with good pressure so it would stick and when the backing peeled off it was stuck. but i am not too sure about if it will work as i cant remember all that well but pretty sure that was my process. almost forgot the water i used in the cloth and on the glass was very mildly soapy so it could slide without sticking till i wanted it too.

[Josh2002cc]

Here are a few pictures of the decals I had made up. I am not one for really big decals so plain and to the point does it for me.

On a lighter note, I notice in the pictures my bed looks really beat up.