readylift or stock?

[hondarider552]

i have the ready lift torsion keys in the lbz right now, and when i race, i loosen them all the way up, but my cv's are still not level. do you think i should put the sdtock keys back in to acheive the level cv angles? this is also before i found out that you could just crank the stock keys..

[Schwinn68]

do you need the lift keys to clear your tires? If you're gonna be racing a lot or pulling you might be better off putting the stock keys back in so you can lower them all the way and just crank them back up for everyday driving.

[hondarider552]

i dont know if it will clear the nittos with the stock keys. they went on when tires were put on. no pulling for me only 1200 feet at a time ):h

[Schwinn68]

I'm sure the lift keys would be fine then. Isn't the asphalt harder on the trucks anyways? I thinks as long as you have the other front end parts beefed up (sleeves and braces) you should be ok

[hondarider552]

ya id think the asphalt is harder on them, but then again im only moving 7500lbs of resistance not 20k.. haha
thanks for the help :)

[hondarider552]

update: did a few 4x runs with launches at 15-20 spi and straight as an arrow.

[Schwinn68]

update: did a few 4x runs with launches at 15-20 spi and straight as an arrow.
i'd say you have it figured out then! :D