dyno run

[01LB7]

how much damage will putting my truck on the dyno do to my stock alli,
hopin when i turn the switch all the way over to be close to 500hp/1000tq, i know i can't run it this way forever, but i'd like to see how close it is to these numbers. also, is it possible w/ efi to get the truck to stay only in one gear and not downshift? that's what i think will hurt it more than anything, thanks in advance

[Mike]

If you keep the truck in 4th, that will be the c1's and c4's. Chances are the c1's will fail at that torque level in any gear 4th and below. c2's and c3's for 5th, will definitely slip the c3's.

Yes to EFI holding, I know for sure 4th. Never tried any others.

[01LB7]

thank you, if i'm reading this correctly, the tranny will slip and i'll get mad?):h

[HeavyChevy83]

Good to know:thumb:http://dmaxcentral.com/forum/images/smilies/thumb.gif

[StuntHeavy]

So did you dyno it? how'd it make out? has anyone ever dyno'd a 1000ft lbs tune on stock trans and made out ok?

[01LB7]

no never did put it on the rollers,was too scared to walk home lol, went and saw some awesome numbers, was really impressed w/ tim's G8 over 500 horse at the wheel

[whistlepig]

i dyno'd my lbz with nick's 535 race tune on a stock tranny it made 479.9 and 819 i'm sure the low number was do to slippage

[whistlepig]

i forgot to ad that was a little over a year ago befor i got a lift pump):h and you may seen my other threads about building a tranny cause mine finally crapped out so what i'm saying it might drive home today but like nick's tune said stock tranny is on borrowed time at that much power

[Timthecarman2004]

no never did put it on the rollers,was too scared to walk home lol, went and saw some awesome numbers, was really impressed w/ tim's G8 over 500 horse at the wheel

Should have dynoed it... I would have helped put it back together...:Handshake:

Thanks on the car. It seems to run pretty good.

[hondarider552]

So did you dyno it? how'd it make out? has anyone ever dyno'd a 1000ft lbs tune on stock trans and made out ok?

Never seen any stock trans/converter hold 1000tq. most only hold high 800's. Only the Husker tunes make 1000+ tq it seems...

[01LB7]

Should have dynoed it... I would have helped put it back together...:Handshake:

Thanks on the car. It seems to run pretty good.

Oh i'm sure you would have lol, you've priced one to me before at a really good price to just waitin till mine gives completely up and won't move, wish craig would have left the other one in it when i bought it from him):h

oh yeah, can't wait till saturday night!