PDA

View Full Version : 942hp on spray

NWTDIESEL
06-12-2010, 06:11 PM
I sprayed a .070 jet today on the dyno and made 942hp. I will get my slicks on as soon as M&H gets them in and get my dang 10 sec pass! I ran 11.3@126 last night and all the guys at the track said smoke was rolling off my proxes through the 1/8th.
Iron-Hyde
06-13-2010, 05:16 AM
i'd like to know how you run so many low 11's without a roll bar or cage...lol...nice numbers bro. :thumb:
NWTDIESEL
06-13-2010, 09:31 AM
I always go to different tracks and the guys in Albuquerque dont really say much to me.
delong_1
06-13-2010, 10:07 PM
what size are you getting Newly, i cant decide if i want to put a set on my pyo's or get another set of wheels of a different size.
NWTDIESEL
06-13-2010, 10:24 PM
Dont put a set on your PYOs. They will be to short. Ill call you.
paint94979
06-13-2010, 10:25 PM
what size are you getting Newly, i cant decide if i want to put a set on my pyo's or get another set of wheels of a different size.

Truthfully i wouldn't mess around i'd go with the M&H Slicks 12.00/16... On my buddy Drakes truck i have seen those things hook up on the street while it was pouring down rain out no lies):h Dmitri runs the huge 395 M&H radials and he cannot hook up.
Noreaster
06-13-2010, 11:49 PM
Dmitri runs the huge 395 M&H radials and he cannot hook up.

If your talking about these http://www.intercotire.com/tires.php?id=23&g=2 something isn't right, theres a few low 9 trucks running them.
NWTDIESEL
06-14-2010, 12:26 AM
Why doesnt anyone run the 30" cheater slick?
paint94979
06-14-2010, 12:47 AM
Why doesnt anyone run the 30" cheater slick?

weak side walls... the M&H Slick 12/16 on my buddies truck stock suspension with long traction bars is consistently in the 1.4 60's
NWTDIESEL
06-14-2010, 08:13 AM
weak side walls... the M&H Slick 12/16 on my buddies truck stock suspension with long traction bars is consistently in the 1.4 60's

Ok, sounds like what i need then. All my runs this weekend were 1.92s and when i ran the 11.3@126 i got a 1.80 60ft-:t
Iceman56
06-14-2010, 08:42 AM
You ever get your 800hp on fuel Newly? At 126mph you should be in the 10's pretty easy. Congrats, get a vid :thumb:
delong_1
06-14-2010, 09:36 AM
you can't run full slicks in super street right?
paint94979
06-14-2010, 11:27 AM
you can't run full slicks in super street right?

Correct unless you are an avid NHRDA racer go with the slicks. All I care about is going as fast as I can period.
Rhall
06-14-2010, 06:28 PM
If dimitris having that much trouble on those big ass m&hs, we stored them in our hotel room):h, then id say Et streets are the way to go if you want to stay with a radial, i had no problem cutting 1.55s with 0 tire spin at all, i had the most trouble with my brakes not wanting to hold when i was spooling, i have no doubt in my mind they would have cut a 1.4 or better.
stingpuller
06-14-2010, 09:35 PM
I ran a 1.499 with the M/H cheater slicks and never had a problem! Who do you know that has had problems firsthand? I also run the 28x9 ET Street with the same results. It turns a few more rpm but run the same times. At 126 you should get yor 10 sec slip.
Rhall
06-15-2010, 06:43 AM
I ran a 1.499 with the M/H cheater slicks and never had a problem! Who do you know that has had problems firsthand? I also run the 28x9 ET Street with the same results. It turns a few more rpm but run the same times. At 126 you should get yor 10 sec slip.

Dmitri was mentioned in an earlier post, saying he couldnt hook up on the cheaters, he also told me that at TS.