Xenon Garage HID's JUNK

[ahulet06]

YouTube - Xenon Garage Lights Beware!!!!!


Bought these out of Kansas city online thinking if they are junk like the cheap eBay ones you can get I would have a better chance getting my money back... WRONG... Beware of this guy no customer support nothing but excuses wanted to add a bunch of relays and blame my truck although same results on both of my dmax's. Thought I might save someone else the trouble!!

[neversatisfied]

What is wrong with them?

[cdmax]

Sell them to Kevin!:hehe:handbang

[01LB7]

Sell them to Kevin!:hehe:handbang

x2 or give em to him for his birthday lol

[x Madmax Diesel]

What is wrong with them?

x2?

[MadMaxx61]

they take 20 sec to get to full intensity as he says in the vid.

[neversatisfied]

Mine don't turn on instantly. How long are they supposed to take?

[ahulet06]

Like stock....I would assume 60mph 2 lane hwy missouri roads + deer I think 20 seconds is enough to get killed. I've seen a lot of guys with them no problem.I wouldn't even give them to kevin they suck so bad

[Kevin G]

Wow feelin all the love from my friends in here...:D

[Kevin G]

Mine don't turn on instantly. How long are they supposed to take?

they take 20 sec to get to full intensity as he says in the vid.

x2?

What is wrong with them?


That wasn't just turning them on. He told me they went out every time he hit the dimmer switch. He drove to my place and I told him to pull up to my house and hit the switch and that video is what happens.

This is exactly what happens when he drives down the road and hits the dimmer switch going from dim to bright and from bright back to dim.(I know because I went for a ride and said F this, these things are junk and dangerous.) There is no way it's the truck because they do the same thing on both of my trucks as they do on both of his. I heard the phone conversation when the guy guaranteed that if Andrew wasn't happy he'd take them back no questions asked, then that night I heard the guy back peddle when Andrew called back and said they didn't work right, he wasn't screaming and yelling about them being junk or anything (like I would have :hello:) he just told him what they were doing and that he would email him the video to check out and see what he thought the problem was and the guy said sure I'll check it out and get right back to you, Now he won't answer the calls at all or call back when he leaves a message for the guy. Magically when I dial the guy two seconds after Andrew gets his voice mail he picks right up for my phone, then it's one excuse right after another why he didn't answer or call back after the messages were left.

[dmaxman06]

ummm mabey this will help it takes a little bit to warm up hids (longer in cold weather) so why dont u do the all on mod it will cost u like a buck and that way ur dims stays on with ur brights so ur not in the dark fyi i have ddm tuneing hids heres a link to do the all on mod if anybody wants to know how to do it hope this helps:thumb:

http://www.duramaxforum.com/forum/how-tos-diy-write-ups/38368-how-headlight-all-mod.html

[ripmf666]

That wasn't just turning them on. He told me they went out every time he hit the dimmer switch. He drove to my place and I told him to pull up to my house and hit the switch and that video is what happens.

This is exactly what happens when he drives down the road and hits the dimmer switch going from dim to bright and from bright back to dim.(I know because I went for a ride and said F this, these things are junk and dangerous.) There is no way it's the truck because they do the same thing on both of my trucks as they do on both of his. I heard the phone conversation when the guy guaranteed that if Andrew wasn't happy he'd take them back no questions asked, then that night I heard the guy back peddle when Andrew called back and said they didn't work right, he wasn't screaming and yelling about them being junk or anything (like I would have :hello:) he just told him what they were doing and that he would email him the video to check out and see what he thought the problem was and the guy said sure I'll check it out and get right back to you, Now he won't answer the calls at all or call back when he leaves a message for the guy. Magically when I dial the guy two seconds after Andrew gets his voice mail he picks right up for my phone, then it's one excuse right after another why he didn't answer or call back after the messages were left.

The onces I run the warm up fast on the low beam. I'm set to all on and the high side warms up when first clicked over. but if I switch back to low and back to high side its right away now wait but I do have to let the highs warm up a few secounds if left off awhile there vmme what ever out of Delaware.I love mine Kevin next to your over or if I come up your way if your at Daniels I will show you mine.

[cdmax]

Like stock....I would assume 60mph 2 lane hwy missouri roads + deer I think 20 seconds is enough to get killed. I've seen a lot of guys with them no problem.I wouldn't even give them to kevin they suck so bad

Well if you knew how to drive after you hit the deer then it wouldn't be so dangerous now would it??handbang:boxing: That's what you get for puttin on the :bling:!

[Kevin G]

ummm mabey this will help it takes a little bit to warm up hids (longer in cold weather) so why dont u do the all on mod it will cost u like a buck and that way ur dims stays on with ur brights so ur not in the dark fyi i have ddm tuneing hids heres a link to do the all on mod if anybody wants to know how to do it hope this helps:thumb:

http://www.duramaxforum.com/forum/how-tos-diy-write-ups/38368-how-headlight-all-mod.html



Yea I've done the all on mod to probably ten or so trucks and I'm sure that would take a lot of the problem away, but I don't think you should have to for the price of this kit when the whole point was that this kit was guaranteed NOT to have this problem. It was explained to them that he had seen that the HID kits in my work truck had a delay in them and this guy said "Oh no he must have one of those junk ebay kits in his, I guarantee ours will work better and if you don't like them I'll take them back no questions asked." He had no clue where I got mine and it sure as hell wasn't ebay..Although I know of a kit off of ebay that work just as good as these and they cost $25 shipped..):h ;)

[Kevin G]

The onces I run the warm up fast on the low beam. I'm set to all on and the high side warms up when first clicked over. but if I switch back to low and back to high side its right away now wait but I do have to let the highs warm up a few secounds if left off awhile there vmme what ever out of Delaware.I love mine Kevin next to your over or if I come up your way if your at Daniels I will show you mine.


Yea that sounds like the kits we have in all of our work trucks Henry, they're all set up with the all on and they act exactly like you describe but these are a lot slower to warm up.

It's just bull crap that the guy tried to dog somebody elses lights first, then tried to blame it on the truck, and said he'd put a set on his buddies truck to show it was Andrews truck(like they'd never put bright and dims on the same truck???) Then quit answering phone calls...

[Kevin G]

Well if you knew how to drive after you hit the deer then it wouldn't be so dangerous now would it??handbang:boxing: That's what you get for puttin on the :bling:!


With all the :bling: you have to have on all the crap you own you're gonna poke at him for putting lights in a truck that might have two or three straight body panels on it...Honestly????

Don't you make me change your screen name.... :boxing:
:moon: