LB7 Injector Replace

[duramaxtiresmoker]

For replacing injectors on an LB7 is there anything else i need to order such as O-rings etc. other than the Injector itself. It is being done at a mechanic shop so not worried about tools just O-rings etc. I need to know ASAP. Thanks!

[duramaxtiresmoker]

Also should add that just one side is being done.

[Noreaster]

talk to Henry aka ripmf666

[01LB7]

grey silicone, return line kit if the injector doesn't come w/ the stuff, vaseline (helps with putting return lines back on, put it on the threads, and a little dab helps hold the copper washer on when you stick the new one in) and some antifreeze

[mreeves23]

Merchant Auto has a LB7 Injector Install kit that includes everything needed for sure. Maybe something to look into.

[ripmf666]

Your injectors come with the washes and o rings. Most like to have a new lower valve cover gaskets and the return line banjo washes and a tube of sealer for the upper valve cover. Also makes sure the shop does not unseat the injector cups if they do the should install new injector cup o rings and use some loctite on them. I have everything on hand if need and you do not have to buy it for both sides you can get just one side.